Craftsman Tool Cabinet.

So I started out with just one block plane, of course, it was a POS home center Stanley, the one in the picture with the red palm rest. I added to that with a better block plane, then a pretty good made in England Stanley No. 4. This was followed up by a couple of small shoulder planes and a Stanley No. 80 scraper plane. I picked up a couple of antique Stanley planes, cleaned them up and sharpened the blades and they cut okay. But then, I made the mistake of trying out a well tuned Lie-Nielsen block plane, I finally realised what a high quality plane could do. That started my downfall, a low angle L-N block plane, a L-N block shoulder plane, these planes rocked. I made my first wooden plane last spring and with a nice blade it cut surprizingly well. At IWF this year I ordered a Lee Valley low angle smoothing plane and a scraping plane, both of which are awesone right out of the box. Well the downside of all this is that now I have nowhere to keep all these tools except a drawer that is now too crouded and I'm afraid that they will be damaged. So now I'm making a cabinet to hold all my prized hand planes.

I'm using Chris Schwarz's plan from Popular Woodworking's Arts and Crafts Furniture Projects book but changing it some. My Lee Valley scraper plane is wider than the cubbies that he called for so I adjusted them so two cubbies are 4 inches wide and I made up for it with two smaller cubbies that will fit my No. 4 plane and my L-N block planes. I also used quartersawn white oak instead of Cherry because thats what I have plenty of in my wood supply. I haven't decided yet how the doors will look but I think that I'm going to change the look of the top.

I glued up the stock yesterday after planing it to the appropriate thickness. Today I unclamped the stock and used the smoothing plane to flush the panels. I then cut the panels to size and started on the dado's for the cubbies and dividers. At the end of the day today I had my first dry fit, you'll notice that the cubbies on the left are wider than the ones on the right. Below the plane cubbies will be 4 small drawers and 2 larger drawers. I plan to add a rack for my fine chisels inside one of the doors and a holder for my Gent's saw on the other. The drawers will hold my marking guages and knives, my files and rasps, and other tools that are banging around in the one large drawer now.

I've learned that hand tools are an important addition to a powertool shop and that quality tools make the difference. What I'm trying to teach myself, and this is hard, is to slow down and take my time. I've always worked quickly and I think that sometimes what I need to do is to not rush through a project, but slow down and work more on precision. My projects come out looking great but there are pieces and parts that could be better, probably no one knows this but me, but it does bother me. So now, for me, I want to slow down and take my time with each and every part of a project.

The important thing is not to stop questioning. Albert Einstein

Safety Week Post Safety Glasses for us that wear Glasses

"Be sure to read, understand, and follow all the safety rules that come with your power tools. Knowing how to use your power tools properly will greatly reduce the risk of personal injury. And remember this: there is no more important safety rule than to wear these-- safety glasses."

Well if you wear glasses anyway do you need safety glasses? Well.... yes, your glasses may help you see better but are they designed to protect your eyes? Here's something you should consider when thinking about eye safety.

• Consider frames with side shields, which protect against objects coming at the eyes from an angle, as well as from the front.


• The frames should be made of impact-resistant plastic or polycarbonate.


• For cold weather wear, look for frames made of nylon, rubber or propionate, which do not become brittle in the cold, hold their shape, and are less likely to injure the face in a fall or when something strikes them.


• Titanium is an unusually tough metal used in some sports eyeglasses.


• Wrap-around temples keep the frame more firmly in place.


• Spring hinges allow the frame to flex without breaking
  
  

When considering which safety glasses to purchase keep the ANSI Z87.1 standard in mind. The ANSI Z87.1 standard sets forth requirements for the design, construction, testing, and use of eye protection devices, including standards for impact and penetration resistance. All safety glasses, goggles, and face shields used by employees under OSHA jurisdiction must meet the ANSI Z87.1 standard. The eyewear standard includes the following minimum requirements:

• Provide adequate protection against the hazards for which they are designed


• Be reasonably comfortable


• Fit securely, without interfering with movement or vision


• Be capable of being disinfected if necessary, and be easy to clean


• Be durable


• Fit over, or incorporate, prescription eyewear

Now your safety glasses no longer have to look like the ones that your shop teacher wore along with his short sleeved plaid shirt and bad tie probably including pocket protector that he never seemed to take off even when you saw him outside of school. They can look just as cool as the ones sported by your normally sighted friends. You can even order them online, all you need is your prescription and pupil distance from your last eye exam. I would highly recommend getting some comfortable, cool looking safety glasses because you'll wear them, I tried all kinds of "over glasses" type of safety glasses before I got my prescription and none of them were comfortable so I ended up not wearing them.

My regular everyday glasses do have plastic lenses but they are small and there is no side protection. They offer more protection than wearing nothing but they are not safety glasses. Many woodworkers would spend thousands on a Sawstop and you have ten fingers, loose a few and you can still build nice furniture, but you only have two eyes... Safety Glasses are cheap.

"It is not fair to ask of others what you are not willing to do yourself." Eleanor Roosevelt