The last couple of weekends I spent most of my time finishing the Limbert bookcase, if you're not familiar with my finishing process check out my post on it here. It takes a few days to complete with drying time in between, so while I was waiting I was working on my Shaker table for The Woodwhisperer Guild March Woodworkers Fighting Cancer build. It was kind of nice having two projects going on at the same time, if I got bored with sanding I could switch over to tapering the legs of the table, if I didn't have much time I could work on the drawer. I decided to go with a medium brown finish for the bookcase so I started with medium brown dye and I used brown Mahogany gel stain for the over stain. I took the time to finish the backing plywood prior to attaching it to the back of the case with 1/2 inch staples to allow for any wood movement.
Once the dark wax was mostly dry I had a friend help me carry it into the house, all that quartersawn white oak is heavy. After letting the wax cure overnight I couldn't wait to set up my vintage Kodak camera collection on the top and fill the bookcase with my woodworking and photography books that have been piled on my dining room table for months. Then I decompressed some of my other bookcases leaving me with a whole empty shelf to expand in to.
I was very happy with the way this project came together, I started with just some pictures and measurements, used Sketchup to make them into a workable plan and went on from there. One detail that I didn't cover in my
previous posts is the bevel on the edge of the adjustable shelves, its a nice little touch that you can see in the pictures or
some of the antiques. I created the bevel the same way I did on the top of the Shaker table, I adjusted the angle of my tablesaw to 12.5 degrees and set the fence 1/2 inch away from the blade. Using a tall fence and a magnetic featherboard I carefully moved the shelves vertically past the blade. Cuts like this almost always leave burn marks so a little clean up with a low angle smoothing plane was in order. Every time I make something I learn something new, sometimes something big, sometimes something small, I noticed with this bookcase sitting near my last one that my sanding and finishing have improved. I learned on this one that it is easier to finish a bookcase with the back not attached, a lot easier.
Once the dark wax was mostly dry I had a friend help me carry it into the house, all that quartersawn white oak is heavy. After letting the wax cure overnight I couldn't wait to set up my vintage Kodak camera collection on the top and fill the bookcase with my woodworking and photography books that have been piled on my dining room table for months. Then I decompressed some of my other bookcases leaving me with a whole empty shelf to expand in to.I was very happy with the way this project came together, I started with just some pictures and measurements, used Sketchup to make them into a workable plan and went on from there. One detail that I didn't cover in my
previous posts is the bevel on the edge of the adjustable shelves, its a nice little touch that you can see in the pictures or
some of the antiques. I created the bevel the same way I did on the top of the Shaker table, I adjusted the angle of my tablesaw to 12.5 degrees and set the fence 1/2 inch away from the blade. Using a tall fence and a magnetic featherboard I carefully moved the shelves vertically past the blade. Cuts like this almost always leave burn marks so a little clean up with a low angle smoothing plane was in order. Every time I make something I learn something new, sometimes something big, sometimes something small, I noticed with this bookcase sitting near my last one that my sanding and finishing have improved. I learned on this one that it is easier to finish a bookcase with the back not attached, a lot easier."Happiness is not something ready made. It comes from your own actions."
- His Holiness the Dalai Lama
1 comment:
The grain of the wood looks so beautiful. What a painstaking process!
Post a Comment