When I started my journey into Arts and Crafts furniture I was of course drawn to Stickley's designs, his being the most common in the literature. As I got further along I discovered Charles Limbert and his unique take on furniture. Limbert was a student of European designers, particularly Charles Rennie Mackintosh of the Glasgow school, his designs are noted by cutouts and curves. I've made many Limbert pieces and blogged about them here. I found this bookcase in a reprint of an early 1900's Limbert catalog and searched online auction catalogs until I found this one.
Limbert produced this model with and without a door, and in a double wide version. The single door version fits the size that I want, its 64 inches tall, 12 inches deep and 30 inches wide. I'm not sure if I will add the door or not, but for now I'm proceeding with the assumption that I won't have a door. I took the photo into Google Sketchup and with the know dimensions produced a plan that I've uploaded in The Wood Whisperer Community.
From this model I produced a cutlist and exploded details of the parts. Saturday was spent preparing the Quartersawn White Oak stock and gluing up the parts, I also created a template for the rectangular cutouts at the top of the bookcase and the small lift at the bottom. Sunday I took everything out of the clamps and cleaned off the boards. I trimmed each piece down to the correct size and cut the 3/8th inch dado along the back of the sides and on the top and bottom shelves. Using a T-square guide and a plunge router I cut the dadoes for the top and bottom shelves and for the small shelf. I switched to the router guide and a 3/8th inch bit and cut the mortises for the top and bottom aprons. After squaring up the end of the small shelf dado with a chisel I cut the tenons on the aprons using the dado blade still in the tablesaw.
After doing a little fitting of the pieces with a routerplane and chisel I was able to complete an initial dryfit before calling it a day. I wanted to get a good start on this build because starting next weekend I'll be beginning the Guild March Shaker table project as part of Woodworker's fighting cancer. I'll be recording my progress of the Shaker table and continuing on with this project so look for updates.
"First things first, but not neccessarily in that order." - Dr. Who
1 comment:
Looks great!
Post a Comment